Medical bed head and ceiling units

Bedside panel (ramp)

Represent a high-tech aluminum construction, which is attached to the wall above each bunk, it summarizes the main line of medical gases piping, vacuum and electricity. Each panel is equipped with a light source: a direct and night, you can complete an additional panel of radio and telephone sockets, buttons to call medical staff. The number, type of gas and electrical outlets is determined by the user (customer). Wide range of colors bearing profile, decorative panels and decorative strips allow the panel to fit harmoniously into the interior of each individual chamber.

Ceiling Console

Used to optimize the workplace doctor anesthetist – resuscitation in the operating and emergency rooms. Use the console is extremely easy and simple: do not require the use of physical force (driven by compressed air or electric motors), rotates around its axis by 360 °, open access to quick couplings and electrical outlets. In the interior construction of pipelines used in elastic materials, which provide a safe and long-term operation of the consoles.
Perhaps the most versatile equipment consoles (the number and type of medical gases, the number of electrical outlets, shelves and construction under the additional medical equipment – up to 100 kg).

OR

High-tech design that is used primarily in operating rooms and intensive care. The design is attached to the ceiling above the operating table or bed patient and is static. There are 6 types of structures that are different sizes of work areas, the presence or absence of additional shelves for medical devices, “carrying capacity”, the presence of electric or pneumatic actuators to move the PR in the vertical plane. The number and type of gas, the number of electrical outlets defined by the customer.
Wide range of colors bearing profile, decorative panels and decorative strips allow the panel to fit harmoniously into the interior of each individual chamber.

Bridges

High-tech design that combines all the positive qualities of bedside panels (ramps), and at the same time has the additional advantages in cases where the walls are significant protrusions or indentations, when the head of the bed the patient is turned to the window, or a bed is at a distance from the wall. Structurally, the bridges are different from bedside panels (ramp) by fixing the patient over the bed – to the ceiling. The number and type of gas, the number of electrical outlets defined by the customer.
Wide range of colors bearing profile, decorative panels and decorative strips allow the panel to fit harmoniously into the interior of each individual chamber.